CT525 LS3 RACE ENGINE
Chevrolet Performance CT525 6.2L LS3-Based Race Engine
The Chevrolet Performance CT525 is a competition-focused 6.2-litre V8 developed for high-RPM circle-track racing. Based on the LS3 engine architecture, it uses a six-bolt cross-bolted aluminium block, forged aluminium pistons and a high-lift hydraulic roller camshaft to produce 533 hp at 6,600 rpm and 477 lb-ft of torque at 5,200 rpm.
A single-plane aluminium intake manifold supports carburetted operation, while the six-quart circle-track oil pan is designed to clear most GM rear-steer chassis. The engine is supplied with coil-near-plug ignition, an SFI-certified harmonic balancer and a flexplate.
The carburettor, ignition controller, starter, fuel system, exhaust system and front accessory drive must be purchased separately.
Specifications:
- Engine Type: Gen IV Chevrolet Small-Block V8
- Engine Architecture: LS3-Based
- Displacement: 376 cu in / 6.2 litres
- Fuel System: Carburetted
- Maximum Output: 533 hp at 6,600 rpm
- Maximum Torque: 477 lb-ft at 5,200 rpm
- Block: Cast Aluminium with Six-Bolt Cross-Bolted Main Caps
- Crankshaft: Nodular Iron
- Connecting Rods: Powdered Metal with ARP Bolts
- Pistons: Forged Aluminium
- Cylinder Heads: LS3 Rectangular-Port Aluminium, 68 cc Chambers
- Intake Manifold: Single-Plane Aluminium
- Camshaft: Hydraulic Roller
- Valve Lift: 0.525" Intake / 0.525" Exhaust
- Camshaft Duration at 0.050": 226° Intake / 236° Exhaust
- Valve Size: 2.165" Intake / 1.590" Exhaust
- Bore × Stroke: 4.065" × 3.620" / 103.25 × 92 mm
- Compression Ratio: 10.7:1
- Rocker Arms: Investment-Cast Roller Trunnion
- Rocker Arm Ratio: 1.7:1
- Maximum Recommended Engine Speed: 6,700 rpm
- Reluctor Wheel: 58X
- Engine Balance: Internal
- Recommended Fuel: Premium Pump Fuel
- Oil Pan: Six-Quart Circle-Track Configuration
- Harmonic Balancer: SFI-Certified
- SKU: GM-19434598
Important Installation Notes:
- Requires LS/LSX ignition controller GM-19355863
- Requires a carburettor, starter and fuel system
- Requires an exhaust system and front accessory drive
- Water pump and factory exhaust manifolds are not included
- Designed for dedicated racing use and not intended for street use
- Includes anti-tampering seals
| Brand: GM Genuine / Chevrolet |
| Fitment Location: Engine Bay |
Internal Reference:
GM-19434598